Ball screw pair is a precise, efficient and sensitive transmission element. In view of the difficulty of processing ceramic materials, precision ceramic bearings are mostly hybrid ceramic ball bearings with ceramic rolling elements and inner and outer rings made of chrome steel.

The requirements and selection are the same as ordinary mechanical transmission bearings. With the rapid development of numerical control technology, 'composite, high speed, intelligence, precision, and environmental protection' has become the main trend in the development of today's machine tool industry technology. Ceramic bearings are more and more widely used. For high-speed and high-precision machine tools such as CNC machine tools and machining centers, For spindle support, ultra-precision bearings of P4 and above are required.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

Generally, the maintenance of one-way bearings requires several steps, including: Bearing Factory mainly produces needle roller bearings, solid ring bearings, one-way needle roller bearings, plane thrust bearings, K-type bearings and other products. Use equipment for diagnosis, such as electronic diagnostic equipment, stethoscopes, etc.However, regardless of the quality of one-way bearings, they cannot be separated from the maintenance of one-way bearings in use. But axial load and radial load, etc.

The load of the one-way bearing, the load imposed on the one-way bearing, its nature, size and direction are changeable. For more information, please continue to pay attention to our company's website, we will serve you wholeheartedly ! The single-way bearing table lists the allowable speeds of standard-precision one-way bearings under oil lubrication and grease lubrication. When the size of the ball and needle roller one-way bearings are the same, the needle roller one-way bearings usually have a higher load capacity and can withstand greater vibration and shock loads.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

Semicircular needle roller bearings are usually an indispensable bearing part in the automotive industry. So after installing the semicircular needle roller bearings on the corresponding device, what changes have occurred? When a semicircular needle roller bearing is installed in the brake of an automobile, its concave-convex shaft movement surface will not be worn out due to frequent swings. , Which effectively guarantees driving safety and prolongs the service life of the brake.

For example, it can maintain the bearing function under heavy load, which is not possible with ordinary bearings. Its shell is made of high-quality cold plate extrusion, and the surface is also treated by carbonitriding. They are not only different in shape from needle roller bearings, but also in performance and function. In other words, because the semicircular needle roller bearing has a tough outer raceway, it can effectively resolve various strong impact forces. In this way, the semicircular needle roller bearing not only has strong hardness to resist abrasion, but also has good toughness.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

When the needle bearing rotates, the rolling element A continuous and sleek sound made by rolling on the raceway; abnormal rolling friction sound can make uncomfortable metal friction sounds such as 'creaking, creaking', etc. When the surface of the bearing raceway or the surface of the rolling element is bumped, pressed, or rusted, a certain period of noise and vibration will be generated.Generally speaking, the needle roller bearing will heat up after it starts to run, and after a period of time, it will be at a lower temperature (usually 10-40 degrees higher than room temperature). The main cause of abnormal temperature rise is too much or too little lubricant.

Or the sensor installation location is different, so it is necessary to analyze and compare the measured value of each machine in advance to determine the judgment standard. When Mechanical ball bearings manufacturers the needle roller bearing temperature has not reached the normal state and abnormal temperature rise occurs, the following reasons can be considered. One type of rolling bearing noise is generated by the bearing itself, that is, the inherent noise of the bearing; the other is the noise generated after the bearing is installed, and has nothing to do with the noise of the bearing itself. The internal clearance of TIMKEN imported bearings is too small or the load is too large.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

Especially for low-end needle roller bearings, there are countless small and micro enterprises. Once the capital chain has problems, the company will face difficulties.Probe into the development prospects of needle roller bearings   

Everyone knows that our country is a manufacturer specializing in the production of needle roller bearings. If this continues, it will only cause worse results. The investment is small, the process is simple, and the labor requirements are not high. In fact, it is not easy to screen out these micro-enterprises.   

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

Thrust bearings include thrust needle rollers Bearings and thrust roller bearings.../SG with separate cage needle roller bearings NAF, RNAF, NAFW, RNAFW Roller bearing 3NAUNAGTRU Roller bearing Mechanical ball bearings factory NAS for pulley .

Thrust needle roller bearings are: Thrust needle roller bearings model: Thrust needle roller bearings NTB Thrust roller bearings AZK, AZ Compound needle roller bearings are: With thrust ball bearings NAXI, NAX With thrust roller bearings NBXI, NBX With angular contact thrust ball bearing NATA with three-point contact ball bearing NATB.EG, KTV... The form and classification of IKO needle roller bearings. There are cam follower bearings and roller follower bearings suitable for cam mechanisms and linear motion.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

■In order to avoid the double cooperation of NKX and NKXR bearings, the thrust bearing components should be free in the bearing seat (outer diameter at least D, or D2+0. NX, NX. Of 1% preload.5.Design and safety guidelines for combined needle roller bearings:

■See Table 1 for shaft and bearing seat design.5).Z series

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

 Among them, high-speed machining can effectively improve the machining efficiency of the machine tool and shorten the machining cycle of the workpiece. The assembly quality of precision bearings directly affects their working conditions and service life. Bottom-axis rolling bearing manufacturers suggest that the following points should be paid attention to when using precision bearing equipment: prevent direct impact on the bearing ring; equipment force should not be transmitted through the bearing roll body, if the disassembled precision bearing needs to be used from the beginning. This requires the spindle of the machine tool and its related parts to meet the requirements of high-speed machining.

When the precision bearing is installed on the shaft, the equipment force should be transmitted through the bearing inner ring, and when the precision bearing is installed in the bearing housing hole, the equipment force should be transmitted through the bearing housing; once the equipment is down, the precision bearing should be cleaned, dried and coated with anti-rust Oil or grease treatment to prevent the shaft from receiving rust. Equipment disposal must be handled carefully. The measurement items of the diameter are all measured, and the measured data is fully analyzed. Based on this, the precision matched the size of the precision bearing installation part of the shaft and the seat hole.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()

In order to avoid excessive plastic deformation under high contact stress, loss of bearing accuracy or appearance of cracks, the bearing steel required to manufacture one-way needle roller bearings should have a high elastic limit. The inclined raceway and roller on the outer ring The needle is installed as a lock. After processing them to the appropriate size and shape accuracy, the complete set of needle roller bearings can achieve higher life and running accuracy. What kind of structure is used like a one-way needle roller bearing? One-way needle roller bearings are mainly composed of two parts: a stamped outer ring and a plastic retainer.

Fortunately, there are many varieties of needle roller bearings, which can meet the different needs of various fields.. Because the contact area between the rolling element and the raceway of the ring is small, when the bearing receives a load, especially under the condition of receiving a large load, the contact pressure of the needle roller bearing contacting the surface is very large. Under ordinary conditions, the hardness of one-way needle roller bearings is usually determined according to the overall condition of the bearing load mode and size, bearing size and wall thickness.

文章標籤

nmrbearing 發表在 痞客邦 留言(0) 人氣()